Ballistol maintenance oil, 50 ml

notforsale

not_replaced_in

productlabel

Knivesandtools #EveryDayCloth, micro-fibre cloth

Skerper Paddle Strop STP001, stropping paddle

Skerper Pocket Strop STP002, stropping paddle

Skerper Maintenance Oil Pen MA002, 10 ml

KNAFS Knife Chart: A Modern Guide to Knives Poster, rolled

Skerper Pocket Stone diamond/ceramic sharpening stone, SO003

Shapton Glass Stone Seven sharpening set, 70708

KME Precision Knife Sharpening System, R.P.S.H. Combo Kit, KF-CBO

Work Sharp Micro knife sharpener and 3-piece bit set, WSEDCMCR

Work Sharp Angle Set knife sharpener, WSBCHAGS

Knivesandtools 550 paracord type III, colour: black, 100 ft (30.48 m)

Fenix E28R rechargeable EDC flashlight

Work Sharp Precision Adjust sharpening system, WSBCHPAJ

Lansky Pocket Ceramic Sharpening System

Nano-Oil 10w maintenance oil 8cc/8ml

Handle/blade: micarta/420HC
Blade length: 8.5 cm 
Weight: 60 grams

The **Fox Nauta FX-230** is a remarkable pocket knife that was made in Italy. Perhaps the design is not even that special. The story behind it, however, is! For years Fox Knives has been producing knives for different brands as an OEM manufacturer. But also special assignments for governments around the world. Years ago, for instance, there was an assignment for a special pocket knife for the German navy. Job done: nothing going on. Recently, however, they came across quite a large amount of extra blades from that assignment. For years these had been gathering dust in their warehouse. Time to do something with that!



The result is the Fox Knives Nauta: a slim and light-weight pocket knife for the real gentleman. The blade is made from German 420HC steel, and for the original client the term 'Rostfrei' was stamped into the blade, German for 'stainless'. 420HC might not be stainless, it is corrosion resistant. As such it won't easily be affected by rust and is easy to sharpen.



You open the Fox Nauta with two hands and a slipjoint will offer resistance from accidental closing. Because of this combination the Fox Nauta can legally be carried in many places. The handle of this version is made from micarta. A composite material made from textile and synthetic resin.




Fox Nauta FX-230MIBI Bison Micarta pocket knife

brand

colour

zm_series

handedness

blade_finish

opening_system

handle_material

knife_edge_type

multitool_tools

sharpening_type

knife_bladeshape

pocketknife_lock

pocketknife_steel

pocketknife_onehanded

value_multitool_tools_number

value_weight

value_blade_length

value_opened_length

value_blade_thickness

expectedRestockDate

legal_agecheck_key

msrp_price

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

carry_friendly

With this information we say whether a knife can be legally carried according to the knife laws in the United Kingdom. Warning! There are always exceptions and weapon-free zones where carrying knives may still not be allowed. Here you can find more information about the knife law in the [United Kingdom](/en/ct/uk-knife-laws.htm). No rights can be derived from this information.

UK Carry Friendly

General information

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_closed_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

molle_compatible

MOLLE is a mounting system that allows you to attach sheaths and other accessories to backpacks. With this specification we indicate whether a product is already MOLLE-compatible by default. [Want to learn more MOLLE](/en/ct/what-is-molle.htm)?

MOLLE-compatible

pocket_blade_type

pocketknife_clip

This is the type of lock used. There are many different types of locks that are used by many different brands. [Want to learn more about locks](/en/ct/locking-mechanisms-on-pocket-knives.htm)?

Lock

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

Fox Nauta FX-230MIBI Bison Micarta pocket knife

Fox Nauta FX-230MIBI Bison Micarta pocket knife

Full description

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

Fox Nauta FX-230MIBI Bison Micarta pocket knife

Fox Nauta FX-230MIBI Bison Micarta pocket knife

Fox Nauta FX-230MIBI Bison Micarta pocket knife

Full description

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

Fox Nauta FX-230MIBI Bison Micarta pocket knife

Relevant topics